Transponder Immobilizer System
 
a new age anti-theft mechanism - for smart men who dont take chances...

Transponder technology is the most recent innovation in the automobile industry. It adds to the security feature of the vehicle. Car thefts are a shocking reality in modern Indian towns and cities. Transponder technology is relatively unheard of in India. Barring a few modern luxury cars that are available in the market, this technology is not widely used by car manufacturers in the country.


What is Transponder Technology
?

Introduction of a Transponder Immobilization system, which is built in to all cars made in Europe, USA and Asia as anti-theft security system was a major breakthrough. Cars on Indian roads are yet to find them with the exception of few luxury class vehicles. The system involves a microchip, which is a miniature transmitter and receiver. There is an engine management system inside the dashboard that can recognize the signals transmitted from the microchip. If the correct signals are not detected, the engine will not start.

How does it work?

It is the most dependable anti-theft system, designed to connect with engine control system and with the ignition, starter and fuel pump, which allows engine start if the electronic code on the transponder has been successfully recognized. The system works by inductive coupling with an antenna situated on the ignition switch. On ignition, the centralized Control system of the immobilizer reads the encrypted code from the transponder and if it is recognized as the valid code, the system sends permission to the engine control to start The engine. Each transponder is usually programmed with a 32-digit code with a zero chance of repeating. Each programmed transponder comes with a master and slave (copy). Copies can be made only from the master transponder. An override is possible while the car is being fixed for repairs in a garage.
Transponder

An electronic chip with a permanent memory, which contains an electronic code. The transponder has an antenna, which interface with an electronic control device. Through the antenna, the device emits a fixed frequency signal; the transponder receives the signal and then transmits the electronic code by means of special frequency modulations, to the control unit, which processes the code. The transponder needs no power as it draws the energy necessary for it’s function from the signal emitted by the control device.